-
Pneumatic Diaphragm Valve
- Size: 1″-4″, DN25-DN100
- Pressure: 10bar (145 PSI)
- Material: ASTM 316L, 1.4404,1.4435 NB2 Fe <0.5%
- Temperature: -20 ℃ + 150 ℃ (EPDM) -4 ℉ + 302 ℉ (+ 140 ℃ (SIP, 30) 284 ℉)
- Connection: Clamp, Weld, Thread, 3A BPE DIN SMS IDF ISO
- Body Structure: straight, tee, U-tee, tank bottom valve, multi-channel diaphragm
- Diaphragm Material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Viton)
- Certificate: 3A-18-03，Glass II USP Glass VI Chapter 88，PED 97/23 EC,,FDA177.2600
-
Pneumatic Diaphragm Valve with Control Unit
- Size: 1″-4″, DN25-DN100
- Pressure: 10bar (145 PSI)
- Material: ASTM 316L, 1.4404,1.4435 NB2 Fe <0.5%
- Temperature: -20 ℃ + 150 ℃ (EPDM) -4 ℉ + 302 ℉ (+ 140 ℃ (SIP, 30) 284 ℉)
- Connection: Clamp, Weld, Thread, 3A BPE DIN SMS IDF ISO
- valve body structure: straight, tee, U-tee, tank bottom valve, multi-channel diaphragm
- Diaphragm Material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Viton)
- Certificate: 3A-54-02 / 1580, PED 97/23 EC, FDA177.2600
-
pneumatic reversing globe valve
● Size: DN25 / 1 “to DN100 / 4”
● Temperature: -20℃～150℃
● Pressure: 10bar
● Air supply: 4-7bar
● Material: ASTM 304 / 1.4301,316L / 1.4404
● Seal: EPDM, FPM, HNBR, FDA177.2600
● inner surface treatment: Ra <0.8μm
● Surface treatment: sandblasting, polishing
● Certificate: 3-A-53-06, PED / 97/23 / EC, FDA177.2600 -
Pneumatic Safety Valve
- Size：1″-4″,DN25-DN100
- KV Value：8.5-180m3/h
- Max. temperature：130℃(EPDM)/266℉
- Set pressure：(0-3bar/0-6bar/6-10bar）
- Material：304/316L
- Certification: safety valve manufacturing license for special
-
Pneumatic Tank Bottom Diaphragm Valves
Pneumatic tank bottom diaphragm valve is specially used for discharging medium from tanks, no resort at the chamber.
◆ Size: 1″-4″, DN25-DN100
◆ Highest Temperature: -20 to 150 ℃ (Depending on diaphragm) (Stainless steel actuator)
◆ Highest Temperature: -20 to 130 ℃ (Depending on diaphragm) (Plastic actuator)
◆ Maximum Pressure: Unidirectional (DELTA P = 100%) -
Pressure Reducing Valve-L-Type Access Channel
- SIZE：1 “-3”, DN25-DN80
- Nominal pressure：PN2.5-10
- Inlet pressure：8bar
- Outlet pressure：0.3-5bar
- Kv Value：4-70m3/h
- Max. temperature：180℃
- Medium: steam, liquids and gases
- Connection mode : Clamps, welding, thread,Flange
- Certificate：3-A-64-00，PED/97/23/EC,FDA177.5500
-
Pressure reducing valve(Level access)
- SIZE：1 “-3”, DN25-DN80
- Nominal pressure ：PN2.5-10
- Inlet pressure：8bar
- Outlet pressure：0.3-5bar
- Kv Value：4-70m3/h
- Max. temperature:180℃
- media: steam, liquid, gas
- Connection mode : Clamps, welding, thread,Flange
- Certificate：3-A-64-00，PED/97/23/EC,FDA177.5500
-
Radial Diaphragm Valve
- Size: 3/4″-2.5″, DN20-DN65
- Working Temperature: -20℃ to 150℃ (EPDM/ Silcon)
- Max.Pressure: 10bar
- Operation: manual/pneumatic interchangeable
- Actuator Pressure: 5bar-6bar
- Connection: Weld, Clamp, Other special connection
-
Radial Diaphragm Valve
- Size: 3/4 “-2.5”, DN20-DN65
- Working Temperature: -20 ℃ to 150 ℃ (EPDM/ Silcon)
- Maximum Pressure: 10bar
- Operation: Manual/ Pneumatic interchangeable
- Actuator Pressure: 5bar-6bar
- Outlet Connection: Weld, Clamp, Special interface
- New diaphragm design
- Maintenance is simple, safe, easy to operate
- Self-emptying
- Minimize dead angle
- Excellent value KV
- CIP/ SIP sterilization and cleaning
-
Radial tank bottom diaphragm valve
Technical specifications
-
- Size：3/4″-2.5″，DN20-DN65
- Working temperature：-20℃-120℃（EPDM/Silcon）
- Max.Pressure：10bar
- Operation：Manual / pneumatic interchangeable
- Operating Pressure：5bar-6bar
- Outlet connection： Clamp, weld,Special interface
- New diaphragm design
- Maintenance is simple, safe, easy to operate
- Self emptying function
- Dead angle minimization
- Excellent value KV
- CIP/SIP Sterilizing and cleaning
-
-
Regulating Globe valve
- Pneumatic regulating valve controlled by positioner to achieve flow control (PD) may also adopt self position and flow adjustment (PID) by intelligent process controller.
- Size: 1/2″-6″,DN10-DN150
- Material: 304 / 1.4301,316L / 1.4404
- Maximum temperature: 120℃(standard ) 180℃(option)
- Maximum pressure: vacuum to 10bar
- 0/4 … 20mA to 0 … 5 / 10V (basic type)
- 0/4 … 20mA position feedback output (option)
- Device NET bus control (option)
- Single action / double action (option)
- Connection: clamp, thread, weld, flange, DIN SMS RJT ISO
- Certificate: 3-A-68-00, FDA 177.1550, PED / 97/23 / EC
-
Safety valve
- Specifications: 1″-4″, DN25-DN100
- KV value: 8.5-180m3/h
- Maximum temperature: 130°C (EPDM)/266°F
- Setting pressure: (0-3bar/0-6bar/6-10bar)
- Material: 304/316L
- Certification: Safety Valve Special Manufacturing License
-
Safety Valve-Basic Type
- Size：1″-4″,DN25-DN100
- KV Value：8.5-180m3/h
- Max. temperature：-20℃到150℃（depend on seal material）
- Set pressure：(0-3bar/0-6bar/6-10bar）
- Material：304/316L
- Certification: safety valve manufacturing license for special
-
Safety Valve-Basic Type
- Size ：1″-4″,DN25-DN100
- KV Value ：8.5-180m3/h
- Max. temperature ：-20℃到150℃（depend on seal material）
- Set pressure ：(0-3bar/0-6bar/6-10bar）
- Material ：304/316L
- Certification : safety valve manufacturing license for special
-
Safety valve/Manual venting device
- Size：1″-4″,DN25-DN100
- KV Value：8.5-180m3/h
- Max. temperature：130℃(EPDM)/266℉
- Set pressure：(0-3bar/0-6bar/6-10bar）
- Material：304/316L
- Certification: safety valve manufacturing license for special
-
Sight glass Type Drain Valve
- Size：1″-2″,DN25-DN50
- KV Value：8.5-49m3/h
- Max. temperature：130℃(EPDM)/266℉
- Set-pressure：(0-3bar/0-6bar/6-10bar）
- Material：304/316L
- Certification: safety valve manufacturing license for special
-
Tank Bottom Radial Diaphragm Valve
- Size: 3/4 “-2.5”, DN20-DN65
- Working Temperature: -10 ℃ to 120 ℃ (EPDM/ Silcon)
- Maximum Pressure: 6bar
- Operation: Manual/ Pneumatic interchangeable
- Actuator Pressure: 5bar-6bar
- Outlet Connection: Weld, Clamp, Special interface
- New diaphragm design
- Maintenance is simple, safe, easy to operate
- Self-emptying
- Minimize dead angle
- Excellent value KV
- CIP/ SIP sterilization and cleaning
-
Thermal Mass Flow Meter
- Measuring Medium: Various of Gas (Except acetylene)
- Pipe Size: (Insert connection) DN50-DN2000mm ,In-line connection(DN10-DN2000mm)
- Velocity: 0.1-100Nm/s
- Accuracy: +/-1~2.5%
- Working Temperature: Sensor:-40~+220 degC Transmitter:-20~+45 degC
-
Third generation high clean diaphragm valve
- Specifications: 1″-4″, DN25-DN100
- Pressure: 10bar (145 PSI)
- Material: ASTM 316L, 1.4404, 1.4435 NB2 Fe<0.5%
- Temperature: -20°C +150°C (EPDM)-4°F+302°F (+140°C (SIP, 30) 284°F)
- Connection: clamp, welding, thread, 3A BPE DIN SMS IDF ISO
- valve body structure: straight through, three-way, U-shaped three-way, tank bottom valve, multi-channel diaphragm valve
- Diaphragm material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Vitong)
- Certification: 3A-18-03，PED/97/23 EC,,FDA177.2600
-
Third generation high purity check valve
- Specification 1″-10″;DN25-DN250
- External structure and shaft AISI 316L/304
- Spring AISI 304
- Washer EPDM according to FDA 117.2600
- Surface treatment Ra ≤0.8 μm
- The gasket has NBR, FPM (fluoro rubber) or PTFE, FDA117.2600 (optional)
- welding, thread, clamp, DIN, SMS RJT, IDF, ISO, 3A
- Nominal pressure: 10 bar
- Opening pressure: 0.3bar (DN-25) 0.2bar (DN-32/40) 0.1bar (DN-50/100) (can choose higher opening pressure)
- Working temperature: -10 ° C to +130 ° C (EPDM)
-
Three-way Diaphragm Valve
- Size: 1″-4″, DN25-DN100
- Pressure: 10bar (145 PSI)
- Material: ASTM 316L, 1.4404,1.4435 NB2 Fe <0.5%
- Temperature: -20 ℃ + 150 ℃
- Connection: Clamp, Weld, Thread, 3A BPE DIN SMS IDF ISO
- Body structure: U type tee + sampling valve; U-type links
- Diaphragm material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Viton)
- Certificate: 3A-18-03，PED 97/23 EC,,FDA177.2600
-
U type Three way Diaphragm Valve U-B
- Size: 1″-4″, DN25-DN100
- Pressure: 10bar (145 PSI)
- Material: ASTM 316L, 1.4404,1.4435 NB2 Fe <0.5%
- Temperature: -20 ℃ + 150 ℃
- Connection: Clamp, Weld, Thread, 3A BPE DIN SMS IDF ISO
- Body Structure: U type tee + sampling valve; U-type links
- Diaphragm Material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Viton)
- Certificate: 3A-54-02 / 1580, PED 97/23 EC, FDA177.2600
-
U type Three way Diaphragm Valve U-C
- Size: 1″-4″, DN25-DN100
- Pressure: 10bar (145 PSI)
- Material: ASTM 316L, 1.4404,1.4435 NB2 Fe <0.5%
- Temperature: -20 ℃ + 150 ℃
- Connection: Clamp, Weld, Thread, 3A BPE DIN SMS IDF ISO
- Body structure: U type tee + sampling valve; U-type links
- Diaphragm material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Viton)
- Certificate: 3A-54-02 / 1580, PED 97/23 EC, FDA177.2600
-
U-type Three way Mini Diaphragm Valve
- Size: 1/4″-3/4″, DN6-DN15
- Standard: BPE 3A DIN ISO IDF
- Certificate: PED/97/23/EC，3A-18-03，FDA.177.2600
- Max Temperature: -20℃ to 150℃ (Depending on seal material)(Stainless steel actuator)
- Max Temperature: -20℃ to 130℃ (Depending on seal material)(Plastic actuator)
- Max Pressure: One way (DELTA P=100%)
