-
1000 Series V-Notch Rotary Ball Valve
VALVE SIZE : 1 ~ 20 INCH
PRESSURE RATING : ANSI 150, 300, 600
TEMPERATURE : –
FLOW CHARACTER : MODIFIED EQUAL-PERCENTAGE
SHUT-OFF STANDARD : CLASS IV ~ VI
END CONNECTION : FLANGE, WAFER -
2001 Single-seated control valve
VALVE SIZE : 1/2 ~ 4 INCH Catalogue
PRESSURE RATING : ANSI 150 ~ ANSI 600
TEMPERATURE : -196 C ~ 593 C
FLOW CHARACTER : EQUAL-PERCENTAGE LINEAR QUICK-OPENING
SHUT-OFF STANDARD : CLASS IV ~ VI
END CONNECTION : FLANGED, WELDDED, SCREWED -
2002 Cage-Guided Control Valve
VALVE SIZE : 1 ~ 8 INCH
PRESSURE RATING : ANSI 150 ~ ANSI 600
TEMPERATURE : – 198 oC ~ 316 oC
FLOW CHARACTER : EQUAL-PERCENTAGE LINEAR QUICK-OPENING
SHUT-OFF CLASS : CLASS IV ~ VI
END CONNECTION : FLANGED, WELDDED, SCREWED -
3000 High Performance Butterfly Valve
Valve Size : 2 – 24
Pressure Range : ANSI 150 – ANSI 600
Temperature : -196 C – 593 C
Range : Flow
Coefficient : Approximate Linear Modified Equal-Percentage IV-V
Shutoff Class : Wafer, Flange
End-Connection : -
4000 Series Eccentric Rotary Ball Valve
Valve size ：1″ ~ 8″
Pressure rating : ANSI 150 ~ ANSI 600
Temperature : -196°C ~ 593°C
Flow character : Modified linear
Shutoff class ：Class IV Connection：
Flange，Wafer -
Breathing Valve (Pressure Adjustable)
- Size: 1″-4″, DN25-DN100
- Connection: Clamp, welding, thread, DIN、SMS、IDF、ISO
- Material: ASTM 304/1.4301, 316L1.4404
- Gasket: EPDM FPM
- Pressure: 0.5……2bar
- Vacuum: 0.3……0.9bar
- Temperature: -10℃-130℃
-
Burkert Type 0330 – Direct-acting 2/2 or 3/2-way pivoted armature valve
The 0330 valve is a direct-acting, media-separated pivoted armature valve. It is available as a 2/2 and 3/2-way variant. As a 3/2-way variant, it can be used as a distributor or mixing valve.
-
Burkert Type 2000 – Pneumatically operated 2/2 way angle seat valve CLASSIC
The externally piloted angle seat valve is operated with a single or double–acting piston actuator. The actuator is available in two different materials, depending on the ambient temperature.
-
Burkert Type 5282 – Servo-assisted 2/2-way diaphragm valve
The 5282 valve is a servo-assisted diaphragm valve. A minimum differential pressure is required for the valve to function. Various diaphragm material combinations and circuit functions are available depending on the application.
-
Burkert Type 5404 – Servo-assisted 2/2-way piston valve
The 5404 valve is a servo-assisted piston valve available in NC and NO versions. A minimum differential pressure is required for the valve switching function. The solenoid coils are moulded with high-quality epoxy resin.
-
Burkert Type 6014 – Plunger valve 3/2 way direct-acting
Valve 6014 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application.
-
Burkert Type 6281 – Servo-assisted 2/2 way diaphragm valve
The 6281 valve is a servo-assisted solenoid valve of the S.EV series. A minimum differential pressure is always required for the function of the valve.
-
Clamp end butterfly Valve
- Size: DN10-DN300, 1/2″-12″
- Temperature: 130 ℃
- Pressure: 10bar
- Material: ASTM T304 / T316L, 1.4301 / 1.4404
- Connection: Thread, Flange Welding, Clamp, etc.
- Operation Standard: DIN SMS RJT 3A ISO IDF
- Manual operation: Muti-handles, Pull handles
- Certificate: PED / 97/23 / EC, health wading license
- Pneumatic Operation: Single acting, Double acting, Triple action
-
Constant pressure valve/Back pressure valve
- Size：1.5″-3″,DN40-DN65
- KV Value：KV36m3/h to KV62m3/h
- Contact part of the material: 1.4404/316L, other parts: 304
- Seal： EPDM+PTFE(FDA177.2600)
- Connection mode : Clamps, Welding, Thread,ISO、DIN、SMS、RJT
- Surface: sand blast outside, mirror finished inside (Ra≤0.6μm)
- Working temperature: -10 to 150 ℃
- Working pressure： 8 bar
- The max working pressure: 12 bar ,Supercheuger(option)
- Certificate：3-A-64-00，PED/97/23/EC,FDA177.5500
-
CP10/30/40 CP chemical pump station
- Supplies up to 40 users/workstations with prediluted chemical product
- One chemical inlet for one concentrated chemical product
- Easy dosing adjustment ensures consistent chemical concentration
- Adjustable set point
- Automatic start and stop
- Energy-saving Grundfos IE5 pump motors
- Frequency-controlled pump with soft start and stop
- Option of control unit with empty tank indication
- Easy to service
- Produced in high quality materials with high chemical resistance
-
Diaphragm Regulating Valve
- Analog input: 0/4-20mA, 0-5/10V
- Power: DC24V ± 10%
- Protection: IP68 rating
- Support for manual operation
- One-touch auto-tuning function
- Size: 1″-4″, DN25-DN100
- Material: 1.4435NB2, 316L, 1, .4404, ASME BPE 316L
- Highest Temperature: -30 to 150 ℃ (Depending on seal material) (Stainless steel actuators)
- Highest Temperature: -30 to 130 ℃ (Depending on seal material) (Plastic actuator)
- Maximum Pressure: Unidirectional (DELTA P = 100%)
-
Electric regulating Diaphragm Valve
- Power: DC24V / AC110V / 220V
- Executive Functions:
- Switch Type: input and output signals feedback
- Adjustment Type: signal input 0-10V, feedback 2-10V
- Self-adaptive Valve Setting
- Support for manual operation
- Support body sensors or objects sensors, activate valve to open or close
- Stroke Time: ON to OFF = 90S, 150S
- Size: 1″-4″, DN25-DN100
- Material: ASME BPE 316L, 1.4404,1.4435 NB2 Fe <0.5%
-
Explosion-proof electric actuators
The opening and closing operation of the valve is realized by the switch circuit, and a set of active contact signals are outputted at the same time, indicating that the valve position is in a fully open or fully closed state.
-
Flange Electromagnetic Flow Meter
- Size: DN3-DN3000mm
- Nominal Pressure: 0.6-1.6Mpa(2.5Mpa/4.0Mpa/6.4Mpa…Max 42Mpa)
- Accuracy: +/-0.5%(Standard), 0.3% or 0.2% (Optional)
- Liner: PTFE, Neoprene, Hard Rubber, EPDM, FEP, Polyurethane, PFA
- Output Signal: 4-20mA/Pulse
-
Four Way Safety Valve
- Size：1″-4″,DN25-DN100
- KV Value：8.5-180m3/h
- Max. Temperature：130℃(EPDM)/266℉
- Set Pressure：(0-3bar/0-6bar/6-10bar）
- Material：304/316L
- Certification: safety valve manufacturing license for special
-
Horizontal pneumatic actuator
The horizontal pneumatic actuator is an actuator that rotates the angular travel of the output shaft. It can be mounted to various rotary opening and closing valves such as butterfly valves and ball valves. Horizontal actuators can be configured with a variety of functional options:
1) Basic actuator
2) Actuator + intelligent control unit
3) Actuator + position feedback
4) Actuator + Smart Locator
5) Actuator + position sensor -
Lever exhaust valve
- Specifications: 2″-6″, DN50-DN150
- Material: ASTM 304/1.4301, 316L1.4404
- Washer: EPDM FPM
- Pressure: 10bar
- Temperature: -10 ° C to 130 ° C
-
Manual angle seat valves
- Size: 1/2″-4″,DN10-DN100
- Material: CF8/304、CF8M/316
- Connection : Clamp,thread,flange,BSP、BSP、NPT,、DIN
- Pneumatically operated:
1）Can be configured to position sensor
2）valve locator (process controller)
3）Valve position Regulator
4）MINI C-TOP Control unit - Manual pneumatic interchangeable
- Working pressure：8bar(standard) 10bar(option)
- Working temperature：120℃(standard) 180℃(option)
